Electric Stacker Do's and Don'ts
After working with SO MANY business owners over the years to get reasonable solutions in tiny commercial or industrial strata units, I'm pretty confident what applications should be using electric stackers and which ones shouldn't.
For small or tight warehouses, stackers offer the perfect mix of lift capability and easy maneuverability. They work especially well in back-of-house storage areas, restaurants, and compact commercial spaces where every square foot counts. Pairing a stacker with small two- or three-stage racking helps you take advantage of vertical space and allows you to maximise the cube space in your facility. Here are a few tips to remember:
1) The floor MUST be CLEAN. The tiny load wheels on the outriggers and the drive unit are allergic to tiny bits of wood pallet chaff, 1/8" pebbles, and loose plastic wrap will cost you $$.
2) Make sure you train your staff properly and give them time to get used to the speed that these units work at. Don't rush them and don't expect the performance you will get out of a forklift. That is not going to happen. These things are ponderous, and often need a lot more time per cycle because they almost never have a sideshift.
3) Get good racking from a reputable supplier who knows what they are doing. Make sure they know you will use a stacker with it. Make sure you can reach the top shelf with the unit you WILL have, as every single make and model comes in dozens of configurations. Make sure you install a bottom shelf so that the outriggers have somewhere to "nest" while you are placing pallets. Everyone thinks they can space the pallets on the floor "just so" and that never works. This is often the biggest regret in the small warehouses I see.
4) Limit the time outside. You CAN take these units on asphalt, even in the rain, but clean asphalt is hard on the little load wheels. If you need something to offload pallets out of trucks every day this may not be the right choice. Don't bring a stacker to do the job a forklift.
Above all: DON'T bring a stacker to a forklift job. Stackers are meant to be a slow- speed space-saver. They are not meant offload dozens of pallets a day from trucks or five tons.
Not sure what you need? Just call me 778.792.2293 and get a free site assessment.
Back to Resources